Infinity IL100s User Manual download pdf (Page 10)

INTERLUDE IL100S,IL120S

plays the tones from the test CD and records the relative output

level of each test tone,using the sound-level meter,on the

provided measurement template.After all the tones are complete,

the template contains a response curve for the frequencies

below 100Hz.The user simply notes the frequency of the largest

bass peak,calculates the correct amount of attenuation,and

uses the

“Q-Finder

”to determine the width of the curve.These

three values are dialed into the Bass Optimization System

controls located on the speaker.The entire process takes less

than twenty minutes.

If your dealer does not stock the Bass Optimization System test

and measurement kit,you may purchase it directly from Infinity.

U.S.residents can visit our Web site at www.infinitysystems.com

or call 1-800-553-3332.Canadian residents should contact

their dealer or call 1-800-567-3275.

The enclosure may be cleaned using a soft cloth,dampened with

water only,to remove fingerprints or to wipe off dust.

The grille may be gently vacuumed.Stains may be removed with

an aerosol cleaner,following its instructions.Do not use any

solvents on the grille.

All wiring connections should be inspected and cleaned or

remade periodically.The frequency of maintenance depends on

the metals involved in the connections,atmospheric conditions,

and other factors,but once per year is the minimum.

If a problem occurs,make sure that all connections are properly

made and clean.If a problem exists in one loudspeaker,reverse

the connection wires to the left and right system.If the problem

remains in the same speaker,then the fault is with the loud-

speaker.If the problem appears in the opposite speaker,the

cause is in another component or cable.In the event that your

Interlude loudspeaker system ever needs service,contact your

local Infinity dealer or Infinity directly at 1-800-553-3332 or

www.infinitysystems.com for a service center near you.

MAINTENANCE AND SERVICE

1 2 ... 5 6 7 8 9 10 11 12

No comments

Infinity IL100s User Manual Page 10