Infinity Speaker TSS-1200 User Manual Page 1

TSS-1200Owner’s Guide(120V)TOTAL SPEAKER SOLUTIONSTSS-1200 OM-no LED 9/27/06 2:03 PM Page 3

10TSS-1200 (120V)OPERATIONSurround ModesWhen using the system in a Dolby Digital or DTS home theatersystem, make sure all speakers are set to “Small”.

SPECIFICATIONS11TSS-1200 (120V)TSS-1200Satellites Center ChannelFrequency Range:120Hz – 20,000Hz (±3dB) 120Hz – 20,000Hz (±3dB)RecommendedAmplifier Po

© 2006 Harman International Industries,Incorporated.All rights reserved.Infinity Systems,250 Crossways Park Drive,Woodbury, NY 11797 USA www.infinit

2TSS-1200 (120V)Read First!1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this ap

3TSS-1200 (120V)2 Important Safety Precautions4 Introduction4 Unpacking the System4 Planning Your System5 Placement5 Wall-Mounting the Satellites and

Infinity Total Solutions™Infinity Total Solutions continues Infinity’s longstanding commitmentto accurate sound reproduction. Our proprietary Metal Ma

5TSS-1200 (120V)Left and Right Front ChannelsFor left and right front channels, place one satellite to the leftand another to the right of the televis

6TSS-1200 (120V)Adjustable Wall BracketStep 1.Remove the rear foot by loosening the screw on thebottom of the satellite.Step 2. Mark the positions on

7TSS-1200 (120V)CENTER AND SATELLITE SPEAKER CONNECTIONSTurn Off All PowerAfter placing the speakers, you are ready to connect your system.First, turn

8TSS-1200 (120V)SUBWOOFER CONTROLSRear PanelCROSSOVERFREQUENCYLEVELLINE LEVEL INPHASEMinMaxL RFor LFE use L or RLFE NORMALPOWER50Hz80Hz0˚ 180˚150HzCAU

9TSS-1200 (120V)SUBWOOFER CONNECTIONSIf your receiver/processor does not contain a Dolby Digital or DTS processor but has asubwoofer output:Set line-l