Infinity Speaker TSS-1200 User Manual download pdf (Page 5)

TSS-1200 (120V)

Left and Right Front Channels

For left and right front channels, place one satellite to the left

and another to the right of the television, as shown in Figure 1.

ince the speakers are magnetically shielded, you can place

them very close to the TV without worrying about the magnetic

field distorting the picture.

Center Channel

or the center channel, place the speaker directly on top of,

or below, your television. Use a shelf or one of the included wall

brackets if the television does not provide a stable platform.

Surround Channels

For left and right surround channels, place one speaker on the

left and another on the right, to the side of or slightly behind the

listening area.The surround speakers should be mounted at a

height of between 5 ft. (1.5m) and 7 ft. (2m).

Subwoofer

Since the installation of a subwoofer can be somewhat more

complicated than installing full-range speakers, it is essential

that you read this section very carefully prior to connecting the

subwoofer to your system. Should you have questions relating to

installation, it is advisable to call either your dealer or Infinity’s

Customer Service Department for advice.

The performance of the subwoofer is directly related to its

placement in the listening room and how you align the subwoofer

with the satellite speakers. Setting the volume of the subwoofer

in relation to the left and right speakers is also of critical

importance because it is essential that the subwoofer integrate

smoothly with the entire system. Setting the subwoofer’s volume

level too high will result in an overpowering, boomy bass. Setting

the volume level too low will negate the benefits of the subwoofer.

Here are several additional facts on installation that may prove

useful. It is generally believed that low frequencies (below

125Hz) are nondirectional and, therefore, placement of a

subwoofer within any listening room is not critical.While in

theory it is true that the larger wavelengths of extremely low

frequencies are basically nondirectional, the fact is that, when

installing a subwoofer within the limited confines of a room,

reflections, standing waves and absorptions generated within the

room will strongly influence the performance of any subwoofer

system.

As a result, specific location of the subwoofer becomes

important, and we strongly recommend that you experiment with

placement before choosing a final location. Placement will

depend upon your room (for example, whether or not your room

permits placement of the subwoofer near either satellite) and

the amount and quality of bass r

equir

ed.

PLACEMENT

Mounting on Floor Stands

Optional TSS-STAND1200 floor stands are available, should you

refer to place your TSS-1200 satellites on the floor; see your

dealer or visit www.infinitysystems.com for more information.

n addition, there is a 1/4"-20 insert in each satellite that

allows the satellite to be mounted to many third-party floor

tands. Unscrew the rear foot to reveal the insert.

he TSS-1200 satellites and center channel are designed to also

be mounted on the wall.There is a fixed-mount wall bracket and

n adjustable wall bracket provided for each satellite and the

center channel. Each speaker bracket will require up to four

1-1/2"#10

wood screws; each screw should be fastened to a

wall stud. If a wall stud is unavailable, install an anchor appropriate

for a 1-1/2"

#10 screw.

IMPORTANT SAFETY NOTE: The customer is solely responsible

for proper selection of mounting hardware not included with the

speakers, and for proper assembly and installation of the wall

brackets, including but not limited to the selection of appropriate

weight-bearing supports and proper use of the bracket. Infinity

disclaims any liability for the selection of mounting hardware and/or

bracket installation.Be sure to follow these bracket assembly and

installation instructions carefully.If you have any questions or

doubts about your ability to correctly wall-mount the speakers,

consult with your authorized Infinity dealer or custom installer.

Fixed-Mount Wall Bracket

Step 1. Remove the rear foot by loosening the screw on the

bottom of the satellite.ole

Step 2. Mark the positions on the wall where you would like to

place the mounting screws.

Step 3. Attach the back plate of the bracket to the wall using

three screws (not included).

Step 4. Attach the front plate

(with the spring tab) of the bracket

to the satellite or center channel

usingthe two provided screws.

Step 5. Slide the satellite or center

channel speaker with attached bracket

front plate onto the back plate of the

bracket until the tab locks

into place.

To remove speaker from

the wall, simply push in

the locking tab and slide

the speaker up.

back of the speaker to the screwhead on the wall. Once

positioned properly, the speaker should slide down slightly and

become secure.

WALL-MOUNTING THE SATELLITES AND

CENTER CHANNEL

TSS-1200 OM-no LED 9/27/06 2:03 PM Page 7

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Infinity Speaker TSS-1200 User Manual Page 5

Comments to this Manuals

Related products and manuals for Subwoofers Infinity Speaker TSS-1200